Integration Solutions

DESIGO integration with fire alarm and security systems enables better accessibility and information sharing, reduction of investments in existing systems, reduction in the number of utilities and activation of smoke control, lighting and CCTV systems.
You can monitor and confirm alarms, silence or reset my site, and collect diagnostic information for your fire alarm system.

Providing visitor comfort and controlling the temperature in rooms even when normal setpoint recovery routines are not allowed. For example, if the customer is not in the room, they are allowed to recover some setpoints. When the general spaces such as the corridor are controlled by DESIGO, setpoint recovery and temperature adjustment functions can be used automatically in these locations depending on the building load. (fidelio etc.)

The integration of all HVAC systems in the building ensures that all systems are seen from a single point, save money spent on investment, and save on training and updates in the long term. With DESIGO's advanced messaging, reporting and trending features across all systems, you can increase the value of your investment.
Key gain: It allows to change the temperature set values in full coordination depending on the instant requirement of the building.

The integration of lighting control systems provides energy savings and increased comfort due to presence detection.
Integration provides a single user interface for system time programs, graphical control and monitoring.
You increase productivity when you use Web access, messaging, and alarm management.

Real energy management with the integration of energy meters, HVAC equipment controllers, lighting control, generators and other energy needs and load information. Integration also provides the advantage of reducing energy consumption, site power generation and other energy management strategies.
Integration can be your power protection and backup power. This is particularly important for critical systems such as UPS, backup generator, automatic transfer switches and power distribution units.

Communicating with Variable Speed Drives enables you to realize your energy management control strategies. It enables the load shredding operations required to operate the distribution equipment.

Standard protocols allow you to select competitive solutions for future facility updates and expansion. Having a single user interface also minimizes unnecessary system training.
BACnet®, Modbus®, OPC® and LonWorks® are the most common and popular standard protocols for building automation systems.

Bina You can improve the building performance and operation by integrating the security and access control system with the DESIGO system. A more secure and energy efficient environment is created by enabling setpoint changes depending on CCTV, lighting and asset detection or life safety events.
Internal expense distribution by following the transitions in the working hours.
Monitoring and acknowledgment of security alarms or transmitting acknowledged alarms from the security station.
Delivery of security alarms to phones by message or call with DESIGO Insight software. Remote access to security information over the web.
Control of relays with hand or time programs and release of doors.

There are more than simple temperature and humidity controls behind the creation and guarantee of precise ambient conditions in critical environments. Many other factors should also be considered: the number of cycles and the practical amount of air, changes in floor plans, room pressure, drawer configurations, weather changes and regulatory guidelines.
You can develop the developmental information archiving and reporting features of the InfoCenter Suite® solution in all systems in areas such as regulatory compliance, information security, and operational efficiency. Thanks to the advanced alarm management of the DESIGO Insight software, you can send the alarm status to the relevant personnel as a printout, message or email at any point in the monitored location.

Underground storage tanks for large buildings and campuses are used for fueling emergency and backup generators. The integration of the fuel tank sensor and probe values into the building automation system is often used as a legal requirement for tank level monitoring, distribution and inventory control and leak detection.

The Building Management System (BMS) is frequently required to monitor and control the values in PLC networks and SCADA systems. BMS should also respond to changes in industrial systems by direct integration into processors or software platforms.
For upgrades at your plant, Siemens offers you system advice, reprogramming existing PLCs, and technical support for your applications.

Compressor control systems; they enable the monitoring and adjustment of simple air compressor functions such as loading, unloading and pinching. The integration of compressor control systems into the building automation system ensures that they are part of the overall energy saving strategies implemented in the BMS.
All on-site trend analysis, additional monitoring and operations such as preventive maintenance timelines and remote monitoring reduce maintenance costs, potential equipment failures, unscheduled time, and replacement costs.

Typically, elevator control systems are integrated into the building automation system by third party software and hardware monitoring, which collects elevator information by contactors and cabling. With integration, monitoring and control of alarms, faults, personal information and real time values are obtained.

The building management system (BMS) and the information it provides are valuable for the plant personnel as well as for the production, finance, accounting and IT departments.
The integration of SCADA and production systems ensures the centralization of industrial process control systems and BMS data, the use of a common database and software architecture. With a single software package and user interface, you can monitor, control, link to, or troubleshoot, these critical information.